Online only

3D PRINTED SMART DEVICES WITH HYBRID 3D PRINTING TECHNOLOGY – PROCESS, PROPERTIES AND SIMULATION

€25.00

VAT included

Quantity

Datenschutzbedingungen (bearbeiten im Modul "Kundenvorteile")

Lieferbedingungen (bearbeiten im Modul "Kundenvorteile")

Rücksendebedingungen (bearbeiten im Modul "Kundenvorteile")

Product Details
Description

Abstract:

The combination of flat cut boards and three-dimensional structures printed on them promises advantages with regard to the production of complex devices and products. Unfortunately, there are still neither models nor characteristic values with regard to the design of the components. On the basis of a hinge of PLA and TPU printed on laser-cut circuit boards, a FEM model for the design of a hybrid component will be shown and the parameters relevant for the description will be presented and examination methods for determining meaningful characteristic values will be determined.

Keywords: Hybrider 3D-Druck, Werkstoffeigenschaften FDM, 3D-Druck PLA auf PMMA, 3D-Druck TPU auf PMMA

Reference: ADD-2022-009

Title: 3D PRINTED SMART DEVICES WITH HYBRID 3D PRINTING TECHNOLOGY – PROCESS, PROPERTIES AND SIMULATION
Author(s): C. Schmid, L. Risse, C. Herden, A. von Helbig, M. Dennin, M. Ehrlenbach, J.P. Brüggemann, L. Steuernagel
DOI: 10.48447/ADD-2022-009
Year of publication: 2022
Publication type: conference paper (PDF)
Language: German
Keywords: Hybrider 3D-Druck, Werkstoffeigenschaften FDM, 3D-Druck PLA auf PMMA, 3D-Druck TPU auf PMMA

16 other products in the same category:

Author(s): S.A. Slaby, M. Eiber, A. Mösenbacher, T. Näke

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Einfluss von Poren auf statische- und schwingende Festigkeit von additiv gefertigtem Titan
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => S.A. Slaby, M. Eiber, A. Mösenbacher, T. Näke
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0121
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

)
1

Einfluss von Poren auf statische- und schwingende Festigkeit von additiv gefertigtem Titan

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Einfluss von Poren auf statische- und schwingende Festigkeit von additiv gefertigtem Titan
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => S.A. Slaby, M. Eiber, A. Mösenbacher, T. Näke
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0121
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

)
1

€25.00

Author(s): T.Rosnitschek, T. Schütt, B. Alber-Laukant, S. Tremmel

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Analyse der Maßhaltigkeit im Atomic Diffusion Additive Manufacturing für Metallische Bauteile
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T.Rosnitschek, T. Schütt, B. Alber-Laukant, S. Tremmel
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-002
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, Atomic Diffusion Additive Manufacturing, Maßhaltigkeit, Sinterschwindung
            [id_feature] => 19
            [position] => 10
        )

)
1

Analyse der Maßhaltigkeit im Atomic Diffusion Additive Manufacturing für Metallische Bauteile

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Analyse der Maßhaltigkeit im Atomic Diffusion Additive Manufacturing für Metallische Bauteile
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T.Rosnitschek, T. Schütt, B. Alber-Laukant, S. Tremmel
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-002
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, Atomic Diffusion Additive Manufacturing, Maßhaltigkeit, Sinterschwindung
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Author(s): L. Risse, G. Kullmer

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => L. Risse, G. Kullmer
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2020-014
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

)
1

Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Implementierung additiver Fertigungsverfahren in den chirurgischen Arbeitsablauf
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => L. Risse, G. Kullmer
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2020-014
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

)
1

German

€25.00

Author(s): T. Ballreich, O. M. Hemmelmann, J. Scholz, U. Jung

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => BIOLOGIZATION OF TECHNOLOGY USING THE EXAMPLE OF A SEATING SYSTEM INSPIRED BY NATURE - IMPLEMENTATION BY MEANS OF ADDITIVE MANUFACTURING
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T. Ballreich, O. M. Hemmelmann, J. Scholz, U. Jung
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-010
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => bionics, modular system, additive manufacturing, nonlinear simulation, pressure distribution, Bryozoa
            [id_feature] => 19
            [position] => 10
        )

)
1

BIOLOGIZATION OF TECHNOLOGY USING THE EXAMPLE OF A SEATING SYSTEM INSPIRED BY NATURE

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => BIOLOGIZATION OF TECHNOLOGY USING THE EXAMPLE OF A SEATING SYSTEM INSPIRED BY NATURE - IMPLEMENTATION BY MEANS OF ADDITIVE MANUFACTURING
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T. Ballreich, O. M. Hemmelmann, J. Scholz, U. Jung
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-010
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => bionics, modular system, additive manufacturing, nonlinear simulation, pressure distribution, Bryozoa
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Online only

Author(s): S. Vervoort, A. Halfpenny, R. Plaskitt, M. Hill

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => CAE-basierte Lebensdauerabschätzung von additiv gefertigten Bauteilen aus TI-6AL-4V
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => S. Vervoort, A. Halfpenny, R. Plaskitt, M. Hill
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-013
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, Ermüdung, Werkstoffverhalten, Ti-6Al-4V, Implantat
            [id_feature] => 19
            [position] => 10
        )

)
1

CAE-basierte Lebensdauerabschätzung von additiv gefertigten Bauteilen aus TI-6AL-4V

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => CAE-basierte Lebensdauerabschätzung von additiv gefertigten Bauteilen aus TI-6AL-4V
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => S. Vervoort, A. Halfpenny, R. Plaskitt, M. Hill
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-013
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, Ermüdung, Werkstoffverhalten, Ti-6Al-4V, Implantat
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Author(s): B. Blinn, T. Hassel, H.-J. Maier, T. Beck

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Analyse des Zusammenhangs zwischen prozessinduzierter Mikrostruktur und resultierendem quasistatischem und zyklischem Verformungsverhalten von WAAM-Werkstoffstrukturen
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => B. Blinn, T. Hassel, H.-J. Maier, T. Beck
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2020-015
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

)
1

Analyse des Zusammenhangs zwischen prozessinduzierter Mikrostruktur und resultierendem quasistatischem und zyklischem Verform...

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Analyse des Zusammenhangs zwischen prozessinduzierter Mikrostruktur und resultierendem quasistatischem und zyklischem Verformungsverhalten von WAAM-Werkstoffstrukturen
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => B. Blinn, T. Hassel, H.-J. Maier, T. Beck
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2020-015
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

)
1

German

€25.00

Author(s): U.Jung, O. Hemmelmann, A. Kern

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Charakterisierung und Bewertung von defekten in additiv gefertigtem ALSI10MG hinsichtlich Werkstoffermüdung
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => U.Jung, O. Hemmelmann, A. Kern
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-009
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, AlSi10Mg, Computertomographie, Defekte, Ermüdungsverhalten
            [id_feature] => 19
            [position] => 10
        )

)
1

Charakterisierung und Bewertung von defekten in additiv gefertigtem ALSI10MG hinsichtlich Werkstoffermüdung

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Charakterisierung und Bewertung von defekten in additiv gefertigtem ALSI10MG hinsichtlich Werkstoffermüdung
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => U.Jung, O. Hemmelmann, A. Kern
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-009
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, AlSi10Mg, Computertomographie, Defekte, Ermüdungsverhalten
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Author(s): L. Strauß, G. Löwisch

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Bruchauslösende Inhomogenitäten bei PBF-LB AlSi10Mg-Bauteilen: Ermittlung der Rissinitiierungsphase aus dem CT-Scan
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => L. Strauß, G. Löwisch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2023-294
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => DVM-Arbeitskreis Arbeitskreis Additiv gefertigte Bauteile und Strukturen - Tagung
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2023
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => PBF-LB,AlSi10Mg,Ermüdungsfestigkeit,Rissinitiierung,Computertomographie
            [id_feature] => 19
            [position] => 10
        )

)
1

Bruchauslösende Inhomogenitäten bei PBF-LB AlSi10Mg-Bauteilen: Ermittlung der Rissinitiierungsphase aus dem CT-Scan

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Bruchauslösende Inhomogenitäten bei PBF-LB AlSi10Mg-Bauteilen: Ermittlung der Rissinitiierungsphase aus dem CT-Scan
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => L. Strauß, G. Löwisch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2023-294
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => DVM-Arbeitskreis Arbeitskreis Additiv gefertigte Bauteile und Strukturen - Tagung
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2023
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => PBF-LB,AlSi10Mg,Ermüdungsfestigkeit,Rissinitiierung,Computertomographie
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Online only

Author(s): S. Brenner, V. Nedeljkovic-Groha, A. Widuch, G. Löwisch

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Experimentelle und numerische Untersuchung der Belastbarkeit von additiv gefertigten Gitterstrukturen aus ALSI10MG
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => S. Brenner, V. Nedeljkovic-Groha, A. Widuch, G. Löwisch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0101
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

)
1

Experimentelle und numerische Untersuchung der Belastbarkeit von additiv gefertigten Gitterstrukturen aus ALSI10MG

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Experimentelle und numerische Untersuchung der Belastbarkeit von additiv gefertigten Gitterstrukturen aus ALSI10MG
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => S. Brenner, V. Nedeljkovic-Groha, A. Widuch, G. Löwisch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0101
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 5. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2020
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2020
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

)
1

German

€25.00

Author(s): "A. Weidner"

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Prozessinduzierte Vorerwärmung beim pulverbettbasierten Laserstrahlschmelzen und deren Auswirkung auf die Bauteileigenschaften austenitischer Stahlbauteile
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => "A. Weidner"
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0521
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, Laserstrahlschmelzen, In-Situ-Prozess-überwachung, Wärmeakkumulation, Zwischenlagenzeit
            [id_feature] => 19
            [position] => 10
        )

)
1

Prozessinduzierte Vorerwärmung beim pulverbettbasierten Laserstrahlschmelzen und deren Auswirkung auf die

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Prozessinduzierte Vorerwärmung beim pulverbettbasierten Laserstrahlschmelzen und deren Auswirkung auf die Bauteileigenschaften austenitischer Stahlbauteile
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => "A. Weidner"
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0521
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additive Fertigung, Laserstrahlschmelzen, In-Situ-Prozess-überwachung, Wärmeakkumulation, Zwischenlagenzeit
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Author(s): A. Kern, S. Wörner, H. T. Beier, U. Jung

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ADDITIVELY MANUFACTURED ALSI10MG WITH GRADED MATERIAL PROPERTIES - MANUFACTURING, TESTING AND SIMULATION OF DEFECT DISTRIBUTION
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A. Kern, S. Wörner, H. T. Beier, U. Jung
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-003
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => AlSi10Mg, L-PBF, graded material, computer tomography, fatigue
            [id_feature] => 19
            [position] => 10
        )

)
1

ADDITIVELY MANUFACTURED ALSI10MG WITH GRADED MATERIAL PROPERTIES - MANUFACTURING, TESTING AND SIMULATION OF DEFECT DISTRIBUTION

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ADDITIVELY MANUFACTURED ALSI10MG WITH GRADED MATERIAL PROPERTIES - MANUFACTURING, TESTING AND SIMULATION OF DEFECT DISTRIBUTION
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A. Kern, S. Wörner, H. T. Beier, U. Jung
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-003
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => AlSi10Mg, L-PBF, graded material, computer tomography, fatigue
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Online only

Author(s): M. Ott, N. Meihöfener, R. Koch

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => NEURAL NETWORKS IN DESIGN TO EXPLOIT THE POTENTIAL OF ADDITIVE MANUFACTURING TECHNOLOGIES
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => M. Ott, N. Meihöfener, R. Koch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-014
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Artificial Intelligence; Neuronal Networks; 3D printing; Design for additive Manufacturing
            [id_feature] => 19
            [position] => 10
        )

)
1

NEURAL NETWORKS IN DESIGN TO EXPLOIT THE POTENTIAL OF ADDITIVE MANUFACTURING TECHNOLOGIES

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => NEURAL NETWORKS IN DESIGN TO EXPLOIT THE POTENTIAL OF ADDITIVE MANUFACTURING TECHNOLOGIES
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => M. Ott, N. Meihöfener, R. Koch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-014
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Artificial Intelligence; Neuronal Networks; 3D printing; Design for additive Manufacturing
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Online only

Author(s): T.Schafran, B. Schramm, G. Kullmer, D. T. Schraeder

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Von der Entwicklung bis zum Einsatz einer additiv gefertigten Unterschenkelorthese für Patienten mit einem Charcot-Fuß
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T.Schafran, B. Schramm, G. Kullmer, D. T. Schraeder
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0171
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Unterschenkelorthese, Additive Fertigung, Orthopädietechnik, Charcot-Fuß, Medizinprodukteverordnung (MDR)
            [id_feature] => 19
            [position] => 10
        )

)
1

Von der Entwicklung bis zum Einsatz einer additiv gefertigten Unterschenkelorthese für Patienten mit einem Charcot-Fuß

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Von der Entwicklung bis zum Einsatz einer additiv gefertigten Unterschenkelorthese für Patienten mit einem Charcot-Fuß
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T.Schafran, B. Schramm, G. Kullmer, D. T. Schraeder
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/WP-2020-0171
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Unterschenkelorthese, Additive Fertigung, Orthopädietechnik, Charcot-Fuß, Medizinprodukteverordnung (MDR)
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Author(s): A. Kern, O. Hemmelmann, U. Jung

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Additive Fertigung vs. Guss: Ein Vergleich am Beispiel von Aluminium
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A. Kern, O. Hemmelmann, U. Jung
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2023-302
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => DVM-Arbeitskreis Arbeitskreis Additiv gefertigte Bauteile und Strukturen - Tagung
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2023
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => LPBF,Guss,Aluminium,Schwing-/Festigkeit,Oberflächengüte
            [id_feature] => 19
            [position] => 10
        )

)
1

Additive Fertigung vs. Guss: Ein Vergleich am Beispiel von Aluminium

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Additive Fertigung vs. Guss: Ein Vergleich am Beispiel von Aluminium
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A. Kern, O. Hemmelmann, U. Jung
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2023-302
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => DVM-Arbeitskreis Arbeitskreis Additiv gefertigte Bauteile und Strukturen - Tagung
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2023
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => LPBF,Guss,Aluminium,Schwing-/Festigkeit,Oberflächengüte
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Online only

Author(s): T.Lahmer, J. Lizarazu, K. Nicolai, S. Kleemann, H. Beinersdorf

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Additive Fertigung von Metallbauteilen mittels Extrusionsverfahren
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T.Lahmer, J. Lizarazu, K. Nicolai, S. Kleemann, H. Beinersdorf
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-001
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Composite Extrusion Modelling, Materialcharakterisierung, Mehrskalenmodellierung
            [id_feature] => 19
            [position] => 10
        )

)
1

Additive Fertigung von Metallbauteilen mittels Extrusionsverfahren

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Additive Fertigung von Metallbauteilen mittels Extrusionsverfahren
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T.Lahmer, J. Lizarazu, K. Nicolai, S. Kleemann, H. Beinersdorf
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-001
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Composite Extrusion Modelling, Materialcharakterisierung, Mehrskalenmodellierung
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00

Author(s): A.Kruse, M. Ott, L. Risse, R. Koch

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => 3D-druck – Eine Technologie als Schlüssel zur Steigerung der Teilhabe
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A.Kruse, M. Ott, L. Risse, R. Koch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-016
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Inklusion; 3D-Druck; Alltags- und Montagehilfe; eCommerce
            [id_feature] => 19
            [position] => 10
        )

)
1

3D-druck – Eine Technologie als Schlüssel zur Steigerung der Teilhabe

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => 3D-druck – Eine Technologie als Schlüssel zur Steigerung der Teilhabe
            [id_feature] => 25
            [position] => 0
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A.Kruse, M. Ott, L. Risse, R. Koch
            [id_feature] => 16
            [position] => 1
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/Add-2021-016
            [id_feature] => 15
            [position] => 2
        )

    [3] => Array
        (
            [name] => Event
            [value] => 6. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2021
            [id_feature] => 17
            [position] => 6
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2021
            [id_feature] => 14
            [position] => 7
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Inklusion; 3D-Druck; Alltags- und Montagehilfe; eCommerce
            [id_feature] => 19
            [position] => 10
        )

)
1

German

€25.00