Online only

INFLUENCE OF PBF-LB/M PROCESS PARAMETERS ON ROUGHNESS AND SUBSURFACE POROSITY AS WELL AS ON THE RESULTING...

€25.00

VAT included

Quantity

Datenschutzbedingungen (bearbeiten im Modul "Kundenvorteile")

Lieferbedingungen (bearbeiten im Modul "Kundenvorteile")

Rücksendebedingungen (bearbeiten im Modul "Kundenvorteile")

Product Details
Description

Abstract:

Powder bed fusion of metal with laser beam (PBF-LB/M) is predestined in particular for the production of complex geometries in small batches. However, the surface quality in the as-built state is not sufficient for many applications, which is why processing becomes necessary. In addition, with unfavourable parameter selection, increased pore formation can be observed in the surface-near area. In this study, the influence of the contour parameters of the PBF-LB/M on the surface roughness and, the occurring subsurface porosity of components made of AlSi10Mg was investigated. The results show that at low roughnesses, subsurface pores do influence crack extension. But even at high pore content, no significant influence on the resulting fatigue life can be detected.

Reference: ADD-2022-004

Author(s): M. Moser, S. Brenner, L. Strauß, G. Löwisch, V. Nedeljkovic-Groha
DOI: 10.48447/ADD-2022-004
Year of publication: 2022
Publication type: conference paper (PDF)
Language: German
Keywords: PBF-LB/M, AlSi10Mg, fatigue, surface roughness, subsurface porosity

7 other products in the same category:

Author(s): T. Ballreich, O. M. Hemmelmann, J. Scholz, U. Jung

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => BIOLOGIZATION OF TECHNOLOGY USING THE EXAMPLE OF A SEATING SYSTEM INSPIRED BY NATURE - IMPLEMENTATION BY MEANS OF ADDITIVE MANUFACTURING
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10670
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T. Ballreich, O. M. Hemmelmann, J. Scholz, U. Jung
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10671
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-010
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10672
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => bionics, modular system, additive manufacturing, nonlinear simulation, pressure distribution, Bryozoa
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10673
        )

)
1

BIOLOGIZATION OF TECHNOLOGY USING THE EXAMPLE OF A SEATING SYSTEM INSPIRED BY NATURE

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => BIOLOGIZATION OF TECHNOLOGY USING THE EXAMPLE OF A SEATING SYSTEM INSPIRED BY NATURE - IMPLEMENTATION BY MEANS OF ADDITIVE MANUFACTURING
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10670
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => T. Ballreich, O. M. Hemmelmann, J. Scholz, U. Jung
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10671
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-010
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10672
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => bionics, modular system, additive manufacturing, nonlinear simulation, pressure distribution, Bryozoa
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10673
        )

)
1

German

€25.00

Online only

Editor(s): M. Eiber

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Additiv gefertigte Bauteile und Strukturen
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 9824
        )

    [1] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-BB
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 9821
        )

    [2] => Array
        (
            [name] => Editor(s)
            [value] => M. Eiber
            [id_feature] => 22
            [position] => 5
            [id_feature_value] => 9823
        )

    [3] => Array
        (
            [name] => Event
            [value] => 	7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2022
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 8081
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference proceedings (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 297
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additiv gefertigte Bauteile und Strukturen
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 9822
        )

)
1

7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen

Publication type: conference proceedings (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => Additiv gefertigte Bauteile und Strukturen
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 9824
        )

    [1] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-BB
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 9821
        )

    [2] => Array
        (
            [name] => Editor(s)
            [value] => M. Eiber
            [id_feature] => 22
            [position] => 5
            [id_feature_value] => 9823
        )

    [3] => Array
        (
            [name] => Event
            [value] => 	7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen 2022
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 8081
        )

    [4] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publication type
            [value] => conference proceedings (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 297
        )

    [6] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [7] => Array
        (
            [name] => Keywords
            [value] => Additiv gefertigte Bauteile und Strukturen
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 9822
        )

)
1

German

€90.00

Author(s): M. Ott, N. Meihöfener, R. Koch

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => NEURAL NETWORKS IN DESIGN TO EXPLOIT THE POTENTIAL OF ADDITIVE MANUFACTURING TECHNOLOGIES
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10682
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => M. Ott, N. Meihöfener, R. Koch
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10683
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-014
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10684
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Artificial Intelligence; Neuronal Networks; 3D printing; Design for additive Manufacturing
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10685
        )

)
1

NEURAL NETWORKS IN DESIGN TO EXPLOIT THE POTENTIAL OF ADDITIVE MANUFACTURING TECHNOLOGIES

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => NEURAL NETWORKS IN DESIGN TO EXPLOIT THE POTENTIAL OF ADDITIVE MANUFACTURING TECHNOLOGIES
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10682
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => M. Ott, N. Meihöfener, R. Koch
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10683
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-014
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10684
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Artificial Intelligence; Neuronal Networks; 3D printing; Design for additive Manufacturing
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10685
        )

)
1

German

€25.00

Online only

Author(s): A. Kern, S. Wörner, H. T. Beier, U. Jung

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ADDITIVELY MANUFACTURED ALSI10MG WITH GRADED MATERIAL PROPERTIES - MANUFACTURING, TESTING AND SIMULATION OF DEFECT DISTRIBUTION
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10577
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A. Kern, S. Wörner, H. T. Beier, U. Jung
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10575
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-003
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10574
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => AlSi10Mg, L-PBF, graded material, computer tomography, fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10576
        )

)
1

ADDITIVELY MANUFACTURED ALSI10MG WITH GRADED MATERIAL PROPERTIES - MANUFACTURING, TESTING AND SIMULATION OF DEFECT DISTRIBUTION

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ADDITIVELY MANUFACTURED ALSI10MG WITH GRADED MATERIAL PROPERTIES - MANUFACTURING, TESTING AND SIMULATION OF DEFECT DISTRIBUTION
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10577
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => A. Kern, S. Wörner, H. T. Beier, U. Jung
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10575
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-003
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10574
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => AlSi10Mg, L-PBF, graded material, computer tomography, fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10576
        )

)
1

German

€25.00

Online only

Author(s): C. Schmid, L. Risse, C. Herden, A. von Helbig, M. Dennin, M. Ehrlenbach, J.P. Brüggemann, L. Steuernagel

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => 3D PRINTED SMART DEVICES WITH HYBRID 3D PRINTING TECHNOLOGY – PROCESS, PROPERTIES AND SIMULATION
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10658
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => C. Schmid, L. Risse, C. Herden, A. von Helbig, M. Dennin, M. Ehrlenbach, J.P. Brüggemann, L. Steuernagel
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10659
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-009
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10660
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Hybrider 3D-Druck, Werkstoffeigenschaften FDM, 3D-Druck PLA auf PMMA, 3D-Druck TPU auf PMMA
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10661
        )

)
1

3D PRINTED SMART DEVICES WITH HYBRID 3D PRINTING TECHNOLOGY – PROCESS, PROPERTIES AND SIMULATION

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => 3D PRINTED SMART DEVICES WITH HYBRID 3D PRINTING TECHNOLOGY – PROCESS, PROPERTIES AND SIMULATION
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10658
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => C. Schmid, L. Risse, C. Herden, A. von Helbig, M. Dennin, M. Ehrlenbach, J.P. Brüggemann, L. Steuernagel
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10659
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-009
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10660
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Hybrider 3D-Druck, Werkstoffeigenschaften FDM, 3D-Druck PLA auf PMMA, 3D-Druck TPU auf PMMA
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10661
        )

)
1

German

€25.00

Online only

Author(s): M. Merghany, M. Teschke, F. Stern, J. Tenkamp, F. Walther

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ENHANCED FATIGUE AND LIGHTWEIGHT POTENTIAL ASSESSMENT OF ADDITIVELY MANUFACTURED MATERIALS BY SPECIFIC SHIOZAWA DIAGRAMS
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10597
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => M. Merghany, M. Teschke, F. Stern, J. Tenkamp, F. Walther
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10595
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-005
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10594
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => English
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Laser powder bed fusion (PBF-LB), electron beam powder bed fusion (PBF-EB), AlSi10Mg, TiAl, 316L, fatigue behavior, fatigue damage tolerance
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10596
        )

)
1

ENHANCED FATIGUE AND LIGHTWEIGHT POTENTIAL ASSESSMENT OF ADDITIVELY MANUFACTURED MATERIALS BY SPECIFIC SHIOZAWA DIAGRAMS

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ENHANCED FATIGUE AND LIGHTWEIGHT POTENTIAL ASSESSMENT OF ADDITIVELY MANUFACTURED MATERIALS BY SPECIFIC SHIOZAWA DIAGRAMS
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10597
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => M. Merghany, M. Teschke, F. Stern, J. Tenkamp, F. Walther
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10595
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-005
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10594
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => English
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Laser powder bed fusion (PBF-LB), electron beam powder bed fusion (PBF-EB), AlSi10Mg, TiAl, 316L, fatigue behavior, fatigue damage tolerance
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10596
        )

)
1

English

€25.00

Online only

Author(s): P. Lehner, M. Ley, A. Al-Zuhairi, B. Blinn, R. Teutsch, T. Beck

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ANALYSIS ON THE EFFECTS OF THE ADDITIVELY MANUFACTURED SURFACE ON THE FATIGUE LIFE OF ALSI10MG, CONSIDERING THE DEFECT TOLERANCE
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10618
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => P. Lehner, M. Ley, A. Al-Zuhairi, B. Blinn, R. Teutsch, T. Beck
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10619
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-006
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10620
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Laser Beam Melting (LBM), defect tolerance, fatigue behaviour, defects, “as-built” surface
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10621
        )

)
1

ANALYSIS ON THE EFFECTS OF THE ADDITIVELY MANUFACTURED ...

Publication type: conference paper (PDF)

Array
(
    [0] => Array
        (
            [name] => Title
            [value] => ANALYSIS ON THE EFFECTS OF THE ADDITIVELY MANUFACTURED SURFACE ON THE FATIGUE LIFE OF ALSI10MG, CONSIDERING THE DEFECT TOLERANCE
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 10618
        )

    [1] => Array
        (
            [name] => Author(s)
            [value] => P. Lehner, M. Ley, A. Al-Zuhairi, B. Blinn, R. Teutsch, T. Beck
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 10619
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ADD-2022-006
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 10620
        )

    [3] => Array
        (
            [name] => Year of publication
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publication type
            [value] => conference paper (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Language
            [value] => German
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 300
        )

    [6] => Array
        (
            [name] => Keywords
            [value] => Laser Beam Melting (LBM), defect tolerance, fatigue behaviour, defects, “as-built” surface
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 10621
        )

)
1

German

€25.00

Online only