Nur online erhältlich
Neu

Crack Orientation and Multiaxial Fatigue Analysis in Steel and Cast Iron

In this study, the multiaxial fatigue behavior of two materials, ductile steel S355 and cast iron EN-GJS-500-14, is investigated. Both fatigue lives and crack initiation angles are measured and compared to numerical results. To model the fatigue behavior, the critical plane method is used. All models can predict fatigue life with decent accuracy. The accuracy of the predicted crack initiation angles is less satisfactory. For the Smith-Watson-Topper (SWT) and Fatemi-Socie (FS) models, a weak correlation between the quality of fatigue life and crack orientation prediction is observed, depending on the materials ductility. The best fatigue life prediction for both materials is provided by the short-crack model (SC). Nevertheless, crack orientation estimation for the SC model is less…

25,00 €

Bruttopreis

Menge

Datenschutzbedingungen (bearbeiten im Modul "Kundenvorteile")

Lieferbedingungen (bearbeiten im Modul "Kundenvorteile")

Rücksendebedingungen (bearbeiten im Modul "Kundenvorteile")

Produktdetails
Beschreibung

Artikelnummer: ICMFF14-2025-02

Titel: Crack Orientation and Multiaxial Fatigue Analysis in Steel and Cast Iron
Autor(en): J. Kraft, M. Vormwald
DOI: 10.48447/ICMFF14-2025-02
Veranstaltung: 14. International Conference on Multiaxial Fatigue and Fracture 2025
Jahr der Veröffentlichung: 2025
Publikationsart: Tagungsmanuskript (PDF)
Sprache: Englisch
Stichwörter: multiaxial fatigue,critical plane modells,Non-proportional loading,Crack initiation orientation

16 andere Artikel in der gleichen Kategorie:

Autor(en): M.A. Meggiolaro, J. T.P. Castro, H. Wu

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => A Maximum-Damage Critical Plane Formulation considering Peak Deviatoric Stress Effects
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12056
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => M.A.   Meggiolaro, J.  T.P.  Castro, H.   Wu
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12053
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-32
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12054
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Critical plane,Mean stress effects,Deviatoric damage parameter,Smith-Watson-Topper,Fatemi-Socie
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12055
        )

)
1

A Maximum-Damage Critical Plane Formulation considering Peak Deviatoric Stress Effects

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => A Maximum-Damage Critical Plane Formulation considering Peak Deviatoric Stress Effects
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12056
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => M.A.   Meggiolaro, J.  T.P.  Castro, H.   Wu
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12053
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-32
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12054
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Critical plane,Mean stress effects,Deviatoric damage parameter,Smith-Watson-Topper,Fatemi-Socie
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12055
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): H. Wu, M. A. Meggiolaro, A. C. Miranda, J. T.P. Castro

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Notch sensitivity and short cracks tolerance in environmentally assisted cracking under multiaxial tension-torsion loadings
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12072
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => H.   Wu, M.  A.  Meggiolaro, A.  C.  Miranda, J.  T.P.  Castro
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12069
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-44
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12070
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => short cracks,environmental effects,non-propagating cracks,notch sensitivity,stress gradient effects.
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12071
        )

)
1

Notch sensitivity and short cracks tolerance in environmentally assisted cracking under multiaxial tension-torsion loadings

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Notch sensitivity and short cracks tolerance in environmentally assisted cracking under multiaxial tension-torsion loadings
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12072
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => H.   Wu, M.  A.  Meggiolaro, A.  C.  Miranda, J.  T.P.  Castro
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12069
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-44
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12070
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => short cracks,environmental effects,non-propagating cracks,notch sensitivity,stress gradient effects.
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12071
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): M. Müller, D. Knabner, L. Suchy, A. Hasse

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Effect of welding spots on the stress intensity and crack propagation angle under plain fretting and fretting fatigue with flat-flat contact
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12016
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => M.   Müller, D.   Knabner, L.   Suchy, A.   Hasse
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12013
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-16
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12014
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => fretting fatigue,crack propagation,FE-simulation,welding spots,stress intensity factor
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12015
        )

)
1

Effect of welding spots on the stress intensity and crack propagation angle under plain fretting and fretting fatigue with flat-flat contact

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Effect of welding spots on the stress intensity and crack propagation angle under plain fretting and fretting fatigue with flat-flat contact
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12016
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => M.   Müller, D.   Knabner, L.   Suchy, A.   Hasse
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12013
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-16
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12014
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => fretting fatigue,crack propagation,FE-simulation,welding spots,stress intensity factor
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12015
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): W. C. Hübsch, C. Gaier

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Multiaxial Fatigue Life Prediction based on Complex Invariants Compared to Critical Cutting Plane Approaches
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12008
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => W.  C.  Hübsch, C.   Gaier
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12005
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-11
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12006
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Equivalent stress,Multiaxiality,fatigue analysis
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12007
        )

)
1

Multiaxial Fatigue Life Prediction based on Complex Invariants Compared to Critical Cutting Plane Approaches

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Multiaxial Fatigue Life Prediction based on Complex Invariants Compared to Critical Cutting Plane Approaches
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12008
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => W.  C.  Hübsch, C.   Gaier
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12005
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-11
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12006
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Equivalent stress,Multiaxiality,fatigue analysis
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12007
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): S.S. Penkulinti, N. Saintier, M. Bonneric, B. Verquin, T. Palin-Luc, F. Lefebvre

Numerical Analysis of Defect Population Influence on the Multiaxial High-cycle Fatigue Strength Anisotropy of Ti64 Manufactured by Laser Powder Bed Fusion (L-PBF)

Publikationsart: Tagungsmanuskript (PDF)

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): N. B. Winther, M. L. Larsen, S. M. Jenson, J. H. Andreasen, J. Schjødt-Thomsen

Multiaxial Fatigue Testing of Welded Steel Joints Subjected to Non-Proportional Stress States Induced by Frequency Difference Between Normal and Shear Stresses

Publikationsart: Tagungsmanuskript (PDF)

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): A. Razi, A. Fatemi

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Multiaxial Fatigue of Weldments: Experiments and Modeling
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12028
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A.   Razi, A.   Fatemi
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12025
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-21
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12026
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Fatigue life prediction, Welded joint, Multiaxial loading, Variable amplitude loading, Fracture mechanics, Weld fatigue design codes
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12027
        )

)
1

Multiaxial Fatigue of Weldments: Experiments and Modeling

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Multiaxial Fatigue of Weldments: Experiments and Modeling
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12028
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A.   Razi, A.   Fatemi
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12025
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-21
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12026
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Fatigue life prediction, Welded joint, Multiaxial loading, Variable amplitude loading, Fracture mechanics, Weld fatigue design codes
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12027
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): G. Veile, J. Lotz, J. Rudolph, S. Weihe

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Fatigue assessment of welded component like specimens at 300 °C under variable amplitude loading considering multiaxiality with strain- and energy-based fatigue damage parameters
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12000
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => G.   Veile, J.   Lotz, J.   Rudolph, S.   Weihe
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 11997
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-04
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 11998
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Fatigue,Multiaxiality,Variable amplitude loading,FEM,weld
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 11999
        )

)
1

Fatigue assessment of welded component like specimens at 300 °C under variable amplitude loading considering multiaxiality with strain- and energy-based fatigue damage parameters

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Fatigue assessment of welded component like specimens at 300 °C under variable amplitude loading considering multiaxiality with strain- and energy-based fatigue damage parameters
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12000
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => G.   Veile, J.   Lotz, J.   Rudolph, S.   Weihe
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 11997
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-04
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 11998
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Fatigue,Multiaxiality,Variable amplitude loading,FEM,weld
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 11999
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): M. Beiler, N. M. Bauer, J. Baumgartner, M. Braun

Comparative Evaluation of Machine Learning Models and Super Ellipse Criterion for Fatigue Life Prediction of Welded Joints under Multiaxial Loading

Publikationsart: Tagungsmanuskript (PDF)

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): S. Vantadori, A. Carpinteri, C. Ronchei, D. Scorza, A. Zanichelli

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Fatigue assessment of additively manufactured V-notched Ti6Al4V engineering components under multiaxial stress state in high-cycle regime: a novel approach
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12088
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => S.   Vantadori, A.   Carpinteri, C.   Ronchei, D.   Scorza, A.   Zanichelli
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12085
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-55
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12086
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => critical distance,porosity,surface roughness,Ti6Al4V,V-notch
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12087
        )

)
1

Fatigue assessment of additively manufactured V-notched Ti6Al4V engineering components under multiaxial stress state in high-cycle regime: a novel approach

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Fatigue assessment of additively manufactured V-notched Ti6Al4V engineering components under multiaxial stress state in high-cycle regime: a novel approach
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12088
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => S.   Vantadori, A.   Carpinteri, C.   Ronchei, D.   Scorza, A.   Zanichelli
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12085
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-55
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12086
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => critical distance,porosity,surface roughness,Ti6Al4V,V-notch
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12087
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): S. Ghadar, A. Fatemi, N. Phan

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Application of Multiaxial Fatigue Criteria for Fretting Fatigue Analysis and Life Predictions
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12024
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => S.   Ghadar, A.   Fatemi, N.   Phan
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12021
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-20
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12022
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Multiaxial Fatigue,Fretting Fatigue,Life Prediction
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12023
        )

)
1

Application of Multiaxial Fatigue Criteria for Fretting Fatigue Analysis and Life Predictions

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Application of Multiaxial Fatigue Criteria for Fretting Fatigue Analysis and Life Predictions
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12024
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => S.   Ghadar, A.   Fatemi, N.   Phan
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12021
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-20
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12022
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Multiaxial Fatigue,Fretting Fatigue,Life Prediction
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12023
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): A. Gibb, A. Tsakmakis, M. Vormwald

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Simulation of crack propagation in ductile materials under non-proportional loading conditions. Part I: Modelling of deformation-induced plastic anisotropy
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12092
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A.   Gibb, A.   Tsakmakis, M.   Vormwald
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12089
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-58
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12090
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Plasticity,Phase Field,Multi-axial,Damage,Fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12091
        )

)
1

Simulation of crack propagation in ductile materials under non-proportional loading conditions. Part I: Modelling of deformation-induced plastic anisotropy

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Simulation of crack propagation in ductile materials under non-proportional loading conditions. Part I: Modelling of deformation-induced plastic anisotropy
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12092
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A.   Gibb, A.   Tsakmakis, M.   Vormwald
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12089
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-58
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12090
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Plasticity,Phase Field,Multi-axial,Damage,Fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12091
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): A. Zaiat, A. Blug, G. Laskin, A. Bertz, F. Conrad, C. Kontermann, M. Oechsner

Systematic investigation of the influence of T-stress and LCF overloads in biaxially loaded cruciform specimen on plasticity-induced crack closure using digital image correlation

Publikationsart: Tagungsmanuskript (PDF)

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): J.-A. Meis

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Interior fatigue of gears under special consideration of multiaxial stresses and local material properties
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12036
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => J.-A.   Meis
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12033
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-23
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12034
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Flank Fracture,Interior Fatigue,Critical Plane,Nonmetallic Inclusions,Probabilistic Design
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12035
        )

)
1

Interior fatigue of gears under special consideration of multiaxial stresses and local material properties

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Interior fatigue of gears under special consideration of multiaxial stresses and local material properties
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12036
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => J.-A.   Meis
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12033
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-23
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12034
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Flank Fracture,Interior Fatigue,Critical Plane,Nonmetallic Inclusions,Probabilistic Design
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12035
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): P. Zerres, M. Vormwald

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Crack growth behavior of steel S235 under proportional and non-proportional fatigue loading
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12012
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => P.   Zerres, M.   Vormwald
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12009
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-15
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12010
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => fracture mechanics,fatigue crack growth,non-proportional loading
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12011
        )

)
1

Crack growth behavior of steel S235 under proportional and non-proportional fatigue loading

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Crack growth behavior of steel S235 under proportional and non-proportional fatigue loading
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 12012
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => P.   Zerres, M.   Vormwald
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 12009
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-15
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 12010
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => fracture mechanics,fatigue crack growth,non-proportional loading
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 12011
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu

Autor(en): C. Fällgren, M. Vormwald

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Fatigue strength assessment of different materials under variable amplitude loadings with the Findley damage parameter
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 11984
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => C.   Fällgren, M.   Vormwald
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 11981
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-01
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 11982
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Multiaxial fatigue,Findley parameter,critical plane method,variable amplitude loading,FKM-guideline
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 11983
        )

)
1

Fatigue strength assessment of different materials under variable amplitude loadings with the Findley damage parameter

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Fatigue strength assessment of different materials under variable amplitude loadings with the Findley damage parameter
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 11984
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => C.   Fällgren, M.   Vormwald
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 11981
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/ICMFF14-2025-01
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 11982
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => 14. International Conference on Multiaxial Fatigue and Fracture 2025
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 11974
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2025
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 10293
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Multiaxial fatigue,Findley parameter,critical plane method,variable amplitude loading,FKM-guideline
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 11983
        )

)
1

Englisch

25,00 €

Nur online erhältlich Neu