Nur online erhältlich

Toughening Mechanisms and Enhanced Damage Tolerant Fatigue Behaviour in Laminated Metal Composites

In the present study, fatigue crack growth (FCG) in a laminated metal composite (LMC) consisting of Al-based constituents with dissimilar strength was studied. Additionally, the FCG in both monolithic constituent materials was determined and a linear elastic rule of mixture (ROM) concept was calculated as a reference for the FCG of the laminated composite. Crack networks in the laminates were analyzed post-mortem by means of light microscopy and synchrotron X-Ray tomography (SXCT). Significantly reduced FCG rates for the LMC were found at elevated stress intensity ranges compared to both the monolithic constituents as well as the ROM concept. …

25,00 €

Bruttopreis

Menge

Datenschutzbedingungen (bearbeiten im Modul "Kundenvorteile")

Lieferbedingungen (bearbeiten im Modul "Kundenvorteile")

Rücksendebedingungen (bearbeiten im Modul "Kundenvorteile")

Produktdetails
Beschreibung

Artikelnummer: LCF9-2022-035

Titel: Toughening Mechanisms and Enhanced Damage Tolerant Fatigue Behaviour in Laminated Metal Composites
Autor(en): P. M. Pohl, I. Serrano-Munoz, H. Markötter, M. Göken, H. W. Höppel
DOI: 10.48447/LCF9-2022-035
Veranstaltung: LCF9 - Ninth International Conference on Low Cycle Fatigue
Jahr der Veröffentlichung: 2022
Publikationsart: Tagungsmanuskript (PDF)
Sprache: Englisch
Stichwörter: laminated metal composite, damage tolerance, fatigue crack growth, toughening mechanism, synchrotron X-ray computed tomography

16 andere Artikel in der gleichen Kategorie:

Autor(en): I. Šulák, K. Obrtlík, L. Čelko

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Influence of new thermal and environmental barrier coating on the thermomechanical fatigue behaviour of nickel-base superalloy MAR-M247
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7807
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => I. Šulák, K. Obrtlík, L. Čelko
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7804
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-105
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7805
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => In-Phase,Out-of-Phase,Nickel-based superalloy,Thermal and environmental barrier coating,High temperature fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7806
        )

)
1

Influence of new thermal and environmental barrier coating on the thermomechanical fatigue behaviour of nickel-base superalloy MAR-M247

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Influence of new thermal and environmental barrier coating on the thermomechanical fatigue behaviour of nickel-base superalloy MAR-M247
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7807
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => I. Šulák, K. Obrtlík, L. Čelko
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7804
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-105
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7805
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => In-Phase,Out-of-Phase,Nickel-based superalloy,Thermal and environmental barrier coating,High temperature fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7806
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): M. Bartošák, J. Horváth, O. Havlíček, M. Španiel

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Unified viscoplasticity modelling for isothermal low-cycle fatigue-creep, creep and thermo-mechanical fatigue of SiMo cast iron
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7759
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => M. Bartošák, J. Horváth, O. Havlíček, M. Španiel
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7756
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-065
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7757
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Viscoplasticity,Low-cycle fatigue,Fatigue-creep,Creep,Thermo-mechanical fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7758
        )

)
1

Unified viscoplasticity modelling for isothermal low-cycle fatigue-creep, creep and thermo-mechanical fatigue of SiMo cast iron

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Unified viscoplasticity modelling for isothermal low-cycle fatigue-creep, creep and thermo-mechanical fatigue of SiMo cast iron
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7759
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => M. Bartošák, J. Horváth, O. Havlíček, M. Španiel
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7756
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-065
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7757
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Viscoplasticity,Low-cycle fatigue,Fatigue-creep,Creep,Thermo-mechanical fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7758
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): D. Jobski, S. Linn, C. Kontermann, M. Oechsner

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Harmonized modelling of low cycle fatigue life curves with temperature, dwell and strain rate variation
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7747
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => D. Jobski, S. Linn, C. Kontermann, M. Oechsner
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7744
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-052
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7745
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => fatigue life curves,Manson Coffin,steam turbine,CX12CrMoVNbN9-1 (C91),creep-fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7746
        )

)
1

Harmonized modelling of low cycle fatigue life curves with temperature, dwell and strain rate variation

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Harmonized modelling of low cycle fatigue life curves with temperature, dwell and strain rate variation
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7747
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => D. Jobski, S. Linn, C. Kontermann, M. Oechsner
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7744
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-052
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7745
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => fatigue life curves,Manson Coffin,steam turbine,CX12CrMoVNbN9-1 (C91),creep-fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7746
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): M. Okazaki

Array
(
    [0] => Array
        (
            [name] => Autor(en)
            [value] => M. Okazaki
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7718
        )

    [1] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-015
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7717
        )

    [2] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [3] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [6] => Array
        (
            [name] => Stichwörter
            [value] => Fretting fatigue,Heat Resisting Alloys,Temperature,Tangential force
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7719
        )

)
1

Fretting Fatigue Lives of Heat Resisting Alloys Closely Relating to Temperature.

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Autor(en)
            [value] => M. Okazaki
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7718
        )

    [1] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-015
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7717
        )

    [2] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [3] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [4] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [5] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [6] => Array
        (
            [name] => Stichwörter
            [value] => Fretting fatigue,Heat Resisting Alloys,Temperature,Tangential force
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7719
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): B. Blinn, J. Tenkamp, F. Walther, T. Beck

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Analysis of the cyclic deformation behavior of Al-Si-Mg castalloy within single phases by using cyclic indentation tests
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7767
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => B. Blinn, J. Tenkamp, F. Walther, T. Beck
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7764
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-072
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7765
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Cyclic Indentation Tests,Defect Tolerance,Cyclic Deformation Behavior,AlSi7Mg0.3,Cyclic Hardening Potential
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7766
        )

)
1

Analysis of the cyclic deformation behavior of Al-Si-Mg castalloy within single phases by using cyclic indentation tests

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Analysis of the cyclic deformation behavior of Al-Si-Mg castalloy within single phases by using cyclic indentation tests
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7767
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => B. Blinn, J. Tenkamp, F. Walther, T. Beck
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7764
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-072
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7765
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Cyclic Indentation Tests,Defect Tolerance,Cyclic Deformation Behavior,AlSi7Mg0.3,Cyclic Hardening Potential
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7766
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): M. Pelegatti, D. Benasciutti, F. De Bona, A. Lanzutti, E. Salvati, M. Sortino, J. S. Novak, F. Sordetti, G. Totis, E. Vaglio

Low Cycle Fatigue Behaviour of an AISI 316L Stainless Steel Additively Manufactured by Laser Powder Bed Fusion (L-PBF)

Publikationsart: Tagungsmanuskript (PDF)

Englisch

25,00 €

Nur online erhältlich

Autor(en): F. Conrad, A. Blug, C. Kontermann, D. Regina, J. Kerl, A. Berz, D. Carl, M. Oechsner

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Direction- and path-independent DIC strain-field evaluation for uniaxial and biaxial fatigue crack growth investigations
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7739
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => F. Conrad, A. Blug, C. Kontermann, D. Regina, J. Kerl, A. Berz, D. Carl, M. Oechsner
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7736
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-048
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7737
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Real-time DIC,Fatigue crack growth,Corner-crack and Cruciform specimen
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7738
        )

)
1

Direction- and path-independent DIC strain-field evaluation for uniaxial and biaxial fatigue crack growth investigations

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Direction- and path-independent DIC strain-field evaluation for uniaxial and biaxial fatigue crack growth investigations
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7739
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => F. Conrad, A. Blug, C. Kontermann, D. Regina, J. Kerl, A. Berz, D. Carl, M. Oechsner
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7736
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-048
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7737
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Real-time DIC,Fatigue crack growth,Corner-crack and Cruciform specimen
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7738
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): E. Gautier, B. Levieil, C. Doudard, S. Calloch, A. Ezanno

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Estimation of local plastic behaviour using Adjustable Localization Operator for Low Cycle Fatigue life prediction
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7787
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => E. Gautier, B. Levieil, C. Doudard, S. Calloch, A. Ezanno
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7784
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-089
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7785
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => multiaxial loadings,fatigue life,experimental validation,confined plasticity
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7786
        )

)
1

Estimation of local plastic behaviour using Adjustable Localization Operator for Low Cycle Fatigue life prediction

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Estimation of local plastic behaviour using Adjustable Localization Operator for Low Cycle Fatigue life prediction
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7787
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => E. Gautier, B. Levieil, C. Doudard, S. Calloch, A. Ezanno
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7784
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-089
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7785
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => multiaxial loadings,fatigue life,experimental validation,confined plasticity
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7786
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): D. Šeruga, J. Klemenc, S. Oman, M. Nagode

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Structural finite element analysis using material model with Prandtl operator approach
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7743
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => D. Šeruga, J. Klemenc, S. Oman, M. Nagode
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7740
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-050
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7741
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => stress-strain modelling,elastoplastic response,Prandtl operator approach,finite element analysis
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7742
        )

)
1

Structural finite element analysis using material model with Prandtl operator approach

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Structural finite element analysis using material model with Prandtl operator approach
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7743
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => D. Šeruga, J. Klemenc, S. Oman, M. Nagode
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7740
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-050
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7741
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => stress-strain modelling,elastoplastic response,Prandtl operator approach,finite element analysis
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7742
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): H. Unterrainer

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Automation of durability and fatigue tests with Crack Track & Tracing
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7763
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => H. Unterrainer
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7760
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-066
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7761
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => crack detection,trigger signal,image processing,Crack Initiation and –Growth,Fatigue Damage
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7762
        )

)
1

Automation of durability and fatigue tests with Crack Track & Tracing

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Automation of durability and fatigue tests with Crack Track & Tracing
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7763
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => H. Unterrainer
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7760
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-066
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7761
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => crack detection,trigger signal,image processing,Crack Initiation and –Growth,Fatigue Damage
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7762
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): J. Wang

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Strain-based life assessment of components made of ductile cast iron
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7735
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => J. Wang
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7732
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-047
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7733
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => LCF,ductile cast iron,Uniform Material Law,damage parameter
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7734
        )

)
1

Strain-based life assessment of components made of ductile cast iron

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Strain-based life assessment of components made of ductile cast iron
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7735
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => J. Wang
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7732
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-047
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7733
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => LCF,ductile cast iron,Uniform Material Law,damage parameter
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7734
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): S. Collomb, E. Charkaluk, A. Constantinescu, S. Hallais

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => In situ cyclic tests combined with high resolution digital correlation of 316L steel from additive manufacturing.
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7795
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => S. Collomb, E. Charkaluk, A. Constantinescu, S. Hallais
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7792
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-096
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7793
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Additive-manufacturing,in-situ,multi-scale,316L steel,HR-DIC
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7794
        )

)
1

In situ cyclic tests combined with high resolution digital correlation of 316L steel from additive manufacturing.

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => In situ cyclic tests combined with high resolution digital correlation of 316L steel from additive manufacturing.
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7795
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => S. Collomb, E. Charkaluk, A. Constantinescu, S. Hallais
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7792
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-096
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7793
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Additive-manufacturing,in-situ,multi-scale,316L steel,HR-DIC
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7794
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): N. Sonntag, M. Jürgens, F. Roohbakhshan, L. A. Jácome, J. Olbricht

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Dwell-Fatigue and Cyclic Softening of Grade P92 steel under LCF and TMF Conditions
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7811
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => N. Sonntag, M. Jürgens, F. Roohbakhshan, L. A. Jácome, J. Olbricht
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7808
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-111
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7809
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => 
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7810
        )

)
1

Dwell-Fatigue and Cyclic Softening of Grade P92 steel under LCF and TMF Conditions

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Dwell-Fatigue and Cyclic Softening of Grade P92 steel under LCF and TMF Conditions
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7811
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => N. Sonntag, M. Jürgens, F. Roohbakhshan, L. A. Jácome, J. Olbricht
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7808
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-111
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7809
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => 
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7810
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): A. Bermond, C. Roume, J. Stolarz, M. Lenci, J. F. Carton, H. Klocker

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Study of the damage evolution of G20Mn5 cast steel under low cycle fatigue
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7791
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A. Bermond, C. Roume, J. Stolarz, M. Lenci, J. F. Carton, H. Klocker
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7788
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-093
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7789
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => 
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7790
        )

)
1

Study of the damage evolution of G20Mn5 cast steel under low cycle fatigue

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Study of the damage evolution of G20Mn5 cast steel under low cycle fatigue
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7791
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A. Bermond, C. Roume, J. Stolarz, M. Lenci, J. F. Carton, H. Klocker
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7788
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-093
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7789
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => 
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7790
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): A. Gottwalt, U. Tetzlaff

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => The role of edge surface quality on cyclic deformation behaviour of non-oriented electrical steel sheets
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7755
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A. Gottwalt, U. Tetzlaff
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7752
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-058
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7753
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Non-oriented electrical steel,Crack initiation,Thin sheet,fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7754
        )

)
1

The role of edge surface quality on cyclic deformation behaviour of non-oriented electrical steel sheets

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => The role of edge surface quality on cyclic deformation behaviour of non-oriented electrical steel sheets
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7755
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => A. Gottwalt, U. Tetzlaff
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7752
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-058
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7753
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Non-oriented electrical steel,Crack initiation,Thin sheet,fatigue
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7754
        )

)
1

Englisch

25,00 €

Nur online erhältlich

Autor(en): J. Man, I. Šulák, A. Chlupová, L. Douša, J. Polák

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Cyclic plasticity and LCF behavior of AISI 316L austenitic stainless steel manufactured by selective laser melting (SLM)
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7779
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => J. Man, I. Šulák, A. Chlupová, L. Douša, J. Polák
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7776
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-077
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7777
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Selective laser melting,Low cycle fatigue,Austenitic stainless steel,Dislocation microstructure,Transmission electron microscopy (TEM)
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7778
        )

)
1

Cyclic plasticity and LCF behavior of AISI 316L austenitic stainless steel manufactured by selective laser melting (SLM)

Publikationsart: Tagungsmanuskript (PDF)

Array
(
    [0] => Array
        (
            [name] => Titel
            [value] => Cyclic plasticity and LCF behavior of AISI 316L austenitic stainless steel manufactured by selective laser melting (SLM)
            [id_feature] => 25
            [position] => 0
            [id_feature_value] => 7779
        )

    [1] => Array
        (
            [name] => Autor(en)
            [value] => J. Man, I. Šulák, A. Chlupová, L. Douša, J. Polák
            [id_feature] => 16
            [position] => 1
            [id_feature_value] => 7776
        )

    [2] => Array
        (
            [name] => DOI
            [value] => 10.48447/LCF9-2022-077
            [id_feature] => 15
            [position] => 2
            [id_feature_value] => 7777
        )

    [3] => Array
        (
            [name] => Veranstaltung
            [value] => LCF9 - Ninth International Conference  on Low Cycle Fatigue
            [id_feature] => 17
            [position] => 6
            [id_feature_value] => 7642
        )

    [4] => Array
        (
            [name] => Jahr der Veröffentlichung
            [value] => 2022
            [id_feature] => 14
            [position] => 7
            [id_feature_value] => 6009
        )

    [5] => Array
        (
            [name] => Publikationsart
            [value] => Tagungsmanuskript (PDF)
            [id_feature] => 18
            [position] => 8
            [id_feature_value] => 299
        )

    [6] => Array
        (
            [name] => Sprache
            [value] => Englisch
            [id_feature] => 20
            [position] => 9
            [id_feature_value] => 301
        )

    [7] => Array
        (
            [name] => Stichwörter
            [value] => Selective laser melting,Low cycle fatigue,Austenitic stainless steel,Dislocation microstructure,Transmission electron microscopy (TEM)
            [id_feature] => 19
            [position] => 10
            [id_feature_value] => 7778
        )

)
1

Englisch

25,00 €

Nur online erhältlich